Optical fibers are housed in loose tubes that are made of high-modulus plastic and filled with waterproof compounds.
FRP is applied as central strength member.Loose tubes are SZ stranded around the central strength member.Aramid yarns are used in and over the cable core to prevent it from water ingress. Double polyethylene sheath are applied as outer sheath.
XI’AN OPT Communication Co.,Ltd is one of the largest and reliable optical cable manufacturers and suppliers with rich experience in China. OPT has invested a large amount of resources in product R&D, quality control, professional technical support in networking solutions, to provide customers with higher-performance and the most cost-effective products. We can customized as your requirement.Also, free sample is also available if necessary.
Share:
1.The all dielectric design can be installed without shutting off the power. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and back-props.
2.Accurate process control ensures good mechanical and temperature performance.
3.High quality raw material guarantees the long service life of cable.
Cross Section of Cable
Technical Characteristics
| Item | Contents | Value | |
| 24 | 48 | ||
| Structure | Type | 1+6 | 1+6 |
| Max. fiber | 12 | 12 | |
| Loose tube | counts/tube | ||
| Outer diameter (mm) | 2 | 2 | |
| Fillers | Number | 4 | 2 |
| Central strength member | Material | FRP | |
| Diameter (mm) | 2 | 2 | |
| Water blocking | Material | Water-blocking tape&yarn | |
| Strength member | Material | Aramid yarn | |
| Material & Color | PE & black | ||
| Outer sheath | Thickness(mm) | 1.95 | 1.95 |
| Cable diameter(mm) Approx. | 10.3 | 10.3 | |
| Cable weight(kg/km) Approx. | 80 | 79 | |
| Max allowable Working tension | 1600N | ||
| Rated Tensile Strength | 4000N | ||
| Operation temperature: | -40℃～+70℃ | ||
| Installation temperature | -30℃～+60℃ | ||
| Storage temperature | -40℃～+70℃ | ||
Inquiry
You Might Also Like
